50 Watt Water Cooled Wood Stove Thermoelectric Generator

Devil Watt™ 50 Watt Water Cooled Wood Burning Stove Thermoelectric Generator

The DW-WC-50W Water Cooled Wood Stove Thermoelectric Generator can be placed on the top or mounted on the side of wood stove to power a battery cell. The DW-WC-50W is supplied with a cable that supplies up to 12 VDC matched load and 24 VDC open circuit voltage for charging your off-grid battery system. Plug one or two of them into Tegpro's new Multi-Input Charge Controller.

To ensure that there is an adequate temperature difference necessary for power generation, the low temperature side of the Thermoelectric Generator needs to be cooled by circulating water into the inlet and through the system to the outlet. It is necessary to pump water through these units to cool them. Always make sure all the air is out of the system before firing up the stove. Failure to do so will cause the units to overheat.

50 Watt Water Cooled Wood Stove Thermoelectric Generator Specification

Part Number DW-WC-50W
Output Power 50 Watts
Open circuit Voltage / Matched Load Voltage 24 VDC / 12 VDC
Maximum Temperature of Applied Surface 840°F (450°C)
Dimensions 11.8" (600mm) x 5.7" (146mm) x 2.2" (57mm)
Weight 8.6 lbs. (4 kg)

Download the DW-WC-50W Datasheet

The Devil Watt line of products are proudly supported & distributed by TEGMART. Please contact us for more information.